Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Developring Signal processing on FPGA

My company developes signal processing applications on processors like Motorola's 7447 The application is written in C. Each processor gets header and data. The header is a 'ANSI-C' structure ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

A DSP Builder user might have other ideas for you, but your application sounds like a good one to use DSP Builder (http://www.altera.com/products/software/products/dsp/dsp-builder.html) and SOPC Builder (http://www.altera.com/products/software/products/sopc/sop-index.html) integrated together. The SOPC Builder system can contain a Nios processor to run C code.

I did a quick search for information on using the two tools together and found Application Note 394, "Using SOPC Builder & DSP Builder Tool Flow", available at http://www.altera.com/literature/lit-an.jsp.