Forum Discussion
DDR test of 1P1SX110HN2F43E2VG
Hello :
we known the New DDR test enhancement was released to production test on WW15’2023, help to advise whether you add the new DDR test for 1P1SX110HN2F43E2VG this part or not, thanks!
Amay
10 Replies
- AdzimZM_Altera
Regular Contributor
Hi Amay,
Can you confirm that the 1P1SX110HN2F43E2VG is correct device part?
It's look like the Stratix 10 device but I'm not sure about 1P.
May I know which board that you are working on?
Regards,
Adzim
- Amay
New Contributor
Hello Adzim:
Sorry, correct MPN is 1SX110HN2F43E2VG, help to advise whether you add the new DDR test for this part?
Pls. advise soon, thanks!
- AdzimZM_Altera
Regular Contributor
Hi Amay,
Thank you for your confirmation.
By the new DDR test, do you mean for validating the FPGA?
Do you have the link to that new DDR test enhancement?
Regards,
Adzim
- Amay
New Contributor
Hi Adzim,
We do the FA for Intel 1SG280HN2F43E2VG, the FA report(pls review Engineering Evaluation Report
CI2427-9514) shows after WW15 2023 adding the DDR testing to cover the DDR issue. we do not know any more information.Currently Intel 1SX110HN2F43E2VG(DC: 2433) meets the same DDR failure issue, pls confirm whether Intel add same DDR testing for 1SX110HN2F43E2VG.
pls check your internal team and reply to us ASAP. Till now we rejected 12pcs Intel IC 1SX110HN2F43E2VG with DDR testing.
thanks
Amay
- AdzimZM_Altera
Regular Contributor
Hi Amay,
Yes, the test enhancement has been added to 1SX110HN2F43E2VG same as 1SG280HN2F43E2VG.
Regards,
Adzim
- AdzimZM_Altera
Regular Contributor
Hi Amay,
Sorry for the delay to reply in this thread.
They are not familiar with the term cut-in DC. What is the term means?
And the DC in the picture is the label on the FPGA?
Regards,
Adzim
- Amay
New Contributor
Hello Adzim:
DC is means product date code and cut-in DC is means the improved product date code when you implemented the DDR test.
Could you please advise it? And we want to know whether the product DC is 2428&2433 of attached photos, thanks!
Amay Gu
- Amay
New Contributor
Hello Adzim:
Have not got the replies from your side, we hope to get your replies ASAP.
DC is means product date code and cut-in DC is means the improved product date code when you implemented the DDR test.
Could you please advise it? And we want to know whether the product DC is 2428&2433 of attached photos, thanks!
Amay