Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Cypress USB Device on CycloneIII Development Board

I have been using Altera's Cyclone III 3C120 Development Board which has 2 USB PHY devices, one of them is CY7C68013A. The Altera manual reference states that the chip is put in reset and is for future use. I have also tried using 'Ez USB Console' but it did not recognize the device. I would like to ask that how I can access the chip since I need develop simple USB communication between the board and PC without depending on Altera's IP core.

Thank you very much

2 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    Thank you, thepancake.

    I am looking into that rightnow. I think I would use Cypress since Im having a developmentboard for it.

    Non of the USB device on the Altera's board is easy to use....strange
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    as far as i know, instructions for using the Cypress USB device are not available

    i would probably use an FTDI chip on an HSMC breakout board