Lilian_61
New Contributor
New ContributorCyclone V PCIE reference clock OCT
Hi,
I am using Cyclone V FPGA (5CGXFC4C), I have some questions about the PCIE reference clock (W6,V6) OCT setting.
There are two variations for On Chip Termination:
- Embedded inside FPGA.
-...
Hi
1) PCIe reference OCT is not enabled by default.
2) Yes you are right, you can enable the OCT as the Assignment Editor shown in your screenshot.
Page 12 of application below has some Cyclone V PCIe example designs that you can refer to.
https://www.intel.com/content/www/us/en/docs/programmable/683541/current/software-requirements.html
