Cyclone V: FPGA and HPS in JTAG chain - SFL loader error

Self-made board with 5CSEMA5F31I7N. Windows 7 x64, Quartus 13.1 and Quartus 14.0

Without HPS in JTAG chain (5CSEMA5F31I7N with JTAG chain: header pin 9 to FPGA_TDI; FPGA_TDO to header pin 3) works properly:

Auto detect show me 5CSEMA5;

Attach flash devices -> EPCQ128

Add file: LED_Blink.jic; Program.

Result: EPCQ128 programmed, FPGA after power-on loaded and LED blinked without connected JTAG.

Problem: both FPGA and HPS in JTAG chain

5CSEMA5F31I7N with JTAG chain: header pin 9 to FPGA_TDI; FPGA_TDO to HPS_TDI; HPS_TDO to header pin 3.

Auto detect show me FPGA and HPS in JTAG chain;

LED_Blink.sof programming works properly – LED blinking.

Next step:

Attach flash devices -> EPCQ128

Add file: LED_Blink.jic (used in JTAG chain without HPS)

I see serial flash loader programming problem:

Error(209015): Can't configure device. Expected JTAG ID code 0x02D120DD for device1, but found JTAG ID code 0xFFFFFFFF.