Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Cyclone IV Programming

Hi I have a board with EP4CE622C8. I pull up CONF_DONE, nCONFIG and nSTATUS by 10K resisters. MSEL0,1,2 and nCE pins is connected to GND. According to datasheet Cyclone IV E , I connect Jtag to FP...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

The problem is somewhere in JTAG chain then. Use jtag chain debugger.