Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Cyclone III RAM usage

Hi, i am using a Cyclone III EP3C40 FPGA with 126 M9K Blocks. In my Design there is a SOPC-System with 3 NIOS II CPUs. I assigned 28 / 24 / 48 kBytes of onchip-Memory to the three RAMs. The 24k...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Look at the RAM summary report in the fitter. It will tell you how the individual memory blocks are configured so you can see how they are used to make up the composite memory.