Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Cyclone III PLL Lost Lock

Hi Everyone, I have a problem here, I have a Cyclone III project utilizing a PLL. I set the PLL to generate 192 Mhz clock from input inclk0 50 Mhz (my board has this clock source). When I simul...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Thanks pletz,

I intentionally made simulation stop at 20 us ( = 1000 clock cycles) at *vwf file, but it seem it don't stop in ModelSim at 20 us, this where the warning message appear.

Thanks again, this solve my problem.

Best Regards

Rp.