Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

cyclone iii nios boot from epcs

cyclone iii nios boot from epcs: i use nios_flash_programmer to burn fpga+nios to epcs64 ,but do not boot from epcs,i use memtes to Test EPCS Serial Flash first time : ------------...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Quartus II V9.0 SP2 and Cyclone III boots from EPCS.

One of my projects uses an EP3C40 set to boot from EPCS works fine after upgrading Quartus from 8.1 to 9.0 SP2. The projects had been regenerated and full compiled with 9.0Sp2

Quartus 8.1 is no longer installed so all tools run from 9.0sp2 and i see no issue with epcs boot.