Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Cyclone III configuration corrupts image

All, We have 30 boards with a single EP3c25 wired for JTAG and AS configuration, as per the handbook. Several pairs of eyes have peered at the schematic and the boards and everything looks like...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

--- Quote Start ---

At this point, nobody is really sure what the problem is. It's just that when we bypass the 5v regulator and feed in 5v from an external source, it goes from about 90% failure rate to 90% success rate. Don't know why it's glitching, still working on it.

--- Quote End ---

Sounds like progress, anyway :)

Let us know what you find.

Cheers,

Dave