Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Cyclone III configuration corrupts image

All, We have 30 boards with a single EP3c25 wired for JTAG and AS configuration, as per the handbook. Several pairs of eyes have peered at the schematic and the boards and everything looks like...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Resolution: It turns out that it's a power problem.

Verify: I don't know how to verify. The Verify box in the programming SW is disabled.

CRC: That would mean that I have to generate the checksum somewhere? Or is it already there?