Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Cyclone III configuration corrupts image

All, We have 30 boards with a single EP3c25 wired for JTAG and AS configuration, as per the handbook. Several pairs of eyes have peered at the schematic and the boards and everything looks like...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

First, there are no PLLs. How would I synchronize a reset? I seems to me that all that is handled by the USB Blaster.

Second, i had the same idea, but to use signal tap requires that I am able to configure a bad board, which is what I can't do.