Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

CYCLONE III can't CONFIGURE !...

Hi Everybody, We use Cyclone III (EP3C25E144C8N) fpga in our project. We use EPCS16 for serial programmer. Problem is, fpga cannot finish the configuration. I watched the signals with a lo...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Thanks everybody!..

I have solved the problem, it was the wrong value of R506 resistor. My technician had mounted 24K ohm instead of 24 ohm.

funny but real..

this study shows the importance of the value of this resistor.

Regards..