Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Cyclone II Serial Config

I'm having a rather odd problem and I was wondering whether anyone else has experienced it. I'm using an M25P40 serial prom with an EP2C20. Standard setup, in fact we reused the schematics fro...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

I use M25P16 with 8 pins ,and i also use *.jic ,but the quartus report is silicon ID is wrong ,does any one use M25P16 with 8 pins to replace EPCS16?