Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Cyclone II PS configuration problem

Hi all, I am trying to configure 3 EP2C20 with 3 EPC2 device. The EPC2 device was configured with JTAG. So when the board power up the EP2C20 should be configured by the EPC2. The connec...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

The cascadded connection should be fine, as we used this in another project before :)

Thanks for your info. I saw that too but somehow I read it is only for enhanced config devices (those EPC4, EPC8 etc).

I will give it a try and let u know :) Thanks a lot!