Forum Discussion

MSheh4's avatar
MSheh4
Icon for New Contributor rankNew Contributor
1 year ago

Cyclone 10lp FPGA not programming through Flash chip (EPCQ64A ), but programs ok through JTAG(.sof)

Hi, We have developed a cyclone 10 Lp FPGA (10cl016Y) board, the Schematic is shown below The FPGA chip programs good through JTAG using .sof file, but if the Flash chip is pro...
Configuration
  • MSheh4's avatar
    MSheh4
    Icon for New Contributor rankNew Contributor
    1 year ago

    Hi Fakhrul,

    Thank you for your reply.

    We are using the Active serial configuration, I have verified the MSEL pins and these are set (010) according to the configuration guide.