Forum Discussion

yong's avatar
yong
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Cyclone 10 GX Development Kit JTAG chain error

Hello, I am working on a Cyclone 10 GX Development Kit testing AS Configuration. I use Quartus Programmer tool to program .jic file to QSPI Configuration Device through USB Blaster II cable. It w...
yong's avatar
yong
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Hello Farabi,

Many thanks for your response.

I am the case a) using normal USB Type-A to mini cable and plug into Cyclone 10 board's USB mini socket.

If it is USB mini socket issue, would I also fail to detect Max10 on the JTAG chain? In my case, most of the time (i.e., >80%) Max10 can be detected, but Cyclone10GX is rarely to be detected (i.e, <2%).

When the board was working, both Max10 and Cyclone10GX were detected on the JTAG chain.

Thanks!

Yong