Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

cyclone 1 with byteblaster

i am using altera cyclone 1 with byteblaster cable if the bank containing jtag pins has vccio 2.5v so i will have to connect the vcctarget of jtag to 2.5v and if so the input minimum voltage of j...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

in the datasheet of byteblasterMV the vcc may be 5 or 3.3 or 2.5 so it does not need at least 3.3v supply ,is that right?