Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Could some one explain some thing in this schematic please :)

Im very new to FPGA's and am using this attached schematic to crib from. every thing makes sense apart from the following FPGA pins pins 26,81 held high to 1.2v pins 27,80 held to ground ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Thanks for your tips i shall follow all of them :)

"Create an HDL design of all the pins you plan on using before you finalize the design"

i always do this one hehe :)

once i have checked over my design is it ok if i upload the schematic for you to have a quick once over? it is very simple.

Thank you :)