Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Configure Cy4 Dev Kit EPCS via USB-blaster?

I want to program my Cyclone IV GX Dev Kit ECPS via the J16 header. No header was populated so i soldered one onto the board. I then connect to Quartus II via USB-blaster dongle. No device is detecte...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Thanks, much appreciated. I will look into the updated Altera MAXII design / instructions.