Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Config Done Fails to Go high with simple SOF file(Jtag+USB Blaster)

Hello All, Finlay we have got our boards and started testing them out... We were able to successfully Detect the Cyclone 3 120 chip and run Jtag Debug tests, but not been able to configure the ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Yes We are using IS, and all the setting have been checked multiple times..

the error we are getting is :- Error :Can't recognize silicon ID .

This error apears when trying to load up the Jic file into the epcs using IS.

regards nadeem