Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Config Done Fails to Go high with simple SOF file(Jtag+USB Blaster)

Hello All, Finlay we have got our boards and started testing them out... We were able to successfully Detect the Cyclone 3 120 chip and run Jtag Debug tests, but not been able to configure the ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

do you try to programm the epcs via the jtag or via your IS programming connector ?

what messages do you get ?

have you checked your quartus settings ? in nios forum i had posted my settings for c3 and epcs that i had to add to the project qsf file.