Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Config 1S25 using CPLD

Hi,all I'm tring to use a CPLD to config EP1S25 in PS mode. I've see the datasheet and here's my promblem. When CONF_DONE goes high and config is done, do i need continue clkpulse on the DCLK pin ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

The only information i am aware about DCLK after INIT_DONE is that DCLK must not float and it doesn't matter if it stays 0 or 1