Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

Code works in functional simulation but not on the FPGA board

Greetings! I am working on a verilog code that generates the Lorenz chaotic attractor on the DE2-115 Altera FPGA board. My code generates new values for 3 variables at every posedge of the...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

have you checked the baud rates and other settings of the UART in the FPGA as well as the PC? If they differ, then the UART Rx will not receive data correctly. What about the UART Rx/Tx pin assignements ? are they also assigned to the correct pins on the FPGA/board?