Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorclock requirement, again
I had posted this question previous but received no satisfactory answer. I have a FPGA starter training board. I have been designing some sequential circuits using the TTL macrofunctions and conventi...
Altera_ForumHonored Contributor
Honored ContributorYour part number doesn't make any sense or is incomplete. It most closely resembles that configuration devices in its present form...even though you state it's a Cyclone device.
I'm not sure what you're referring to as far as TTL macrofunctions. It may help to post a schematic or HDL sample of what you're trying to accomplish. If you can identify exactly which board and/or development kit you have then I could point you at example designs for it. As far as general FPGA design with Altera parts, take a look at some of the introductory training courses on the Altera website to get an idea of how things work as well as the following link/PDF: http://www.altera.com/literature/tt/tt_my_first_fpga.pdf Cheers and Good Luck! slacker
