Forum Discussion
Altera_Forum
Honored Contributor
8 years agoChip name for the Intel Cyclone 10 LP Evaluation Board and Quartus V18.0
I am just starting to use the With Quartus Prime (Lite) V18.0, with the Intel Cyclone 10 LP Evaluation Board
. In all the YouTube demonstrations at the start, for the setup, the "cyclone 10p" is listed in the "Family, Device, Board Settings". With this Quartus version at least all you see is cyclone iv e and cyclone gx in the Device Family dropdown box. Numerous chip device names are listed below but I cannot find one that is programmable at the end -- very frustrating as I only find out at the end. The chip label is "10CL025YU25617G" on my (new) Intel Cyclone 10 LP board. Anybody got an answer? What device do you use for your Cyclone FPGA on the "Intel Cyclone 10 LP Evaluation Board" with Quartus? Thanks in advance John6 Replies
- Altera_Forum
Honored Contributor
Did you download and install the Cyclone 10 LP device support (.qdz file)?
http://dl.altera.com/?edition=lite - Altera_Forum
Honored Contributor
OOps!
Thanks - Altera_Forum
Honored Contributor
Still not out of the woods. Quartus needs to locate the download.
What folder should it be in for Windows 10. My root is; C:\intelFPGA_lite\18.0\quartus\bin64\quartus.exe John - Altera_Forum
Honored Contributor
In the Start menu, just run the device installer. You can then point to the .qdz file.
- Altera_Forum
Honored Contributor
Sorry for being so dumb, which start menu?
John - Altera_Forum
Honored Contributor
The Windows Start menu.