Forum Discussion

New Contributor

4 years ago

Changing Device config in embedded Linux

I am using a DE10 Nano board. I want to design a similar board but need to change the FPGA to HDMI pins. What changes I have to do in the embedded Linux Terasic released for DE10 boards?

aikeu

Regular Contributor

4 years ago

Hi Ali10,

You can refer to this document link for some related info:

https://rocketboards.org/foswiki/Documentation/DE10NanoDevelopmentBoard

From that document, there is a project link which has the design related to using FPGA HDMI output:

https://github.com/intel/de10-nano-hardware/blob/master/README.md

Thanks.

Regards,

Aik Eu

Forum Discussion

Changing Device config in embedded Linux

Recent Discussions

Cyclone-V SCFIFO - adding ECC to M10K/MLAB/Auto memory

Will serialization factor of 6 in LVDS serdes IP be supported in the future on Agilex5?

System PLL of Agliex5 PCIE example design cannot be locked after configuration

JTAG Chain Broken on Agilex 7-I Dev Kit

Request for Cyclone V Pinout File Information