Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Auto-Negotiation FAILED with TSEMAC and PHY Marvell 88E1111

I'm trying to check single socket example in a Cyclone III EP3c40. I've configured in SOPC in both case: as 10/100/1000Mbps Ethernet Only as 1000Mbps Small MAC result was always the sa...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Removing auto negotiation in the network card, I've set 100Mbit full-duplex and now it works.

Gigabit is not working when I tried to set the network card to 1gbps full duplex.

The link is established in both cases but in Gigabit never a data was received from host.