Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Auto-Negotiation FAILED with TSEMAC and PHY Marvell 88E1111

I'm trying to check single socket example in a Cyclone III EP3c40. I've configured in SOPC in both case: as 10/100/1000Mbps Ethernet Only as 1000Mbps Small MAC result was always the sa...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

I'm using a commercial board from dev_boards Gmbh. Cyclone III ep3c40 + SDRAM + SSRAM + Flash + Marvell Phy

I've configured TSE_MAC in SOPC builder using two SGDMA's