Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

audio mic input altera de2

hi guys, So I am totally new at this and would like to get some help on how to implement a verilog code that will have an input audio from the mic in jack. And if audio is detected, I will have one ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I also need a bit of help on this. I dont know where to start. I've been programming the DE2 using VHDL and blocks/schematic but never gone further. Where to start? (apart from reading the datasheet for the audio CODEC)? - knowing where to start is difficult!

t34mt sorry for hijacking the thread, it looks like we are faced with similar problem