Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorArria V FPGA overcurrent
Dear All, we have developed an electronic board using an ARRIA V 5AGXBB1D4F40C5 and we followed the requirements for the sequence of the power supplies. we have an exte...
Altera_ForumHonored Contributor
Honored ContributorHi Kronic,
The Vref absolute max rating is -0.5V, so you were right in the middle of a "no man's land", on the edge of permanent damage frontier...I would say, you have 50% chance your FPGA has survived. Was it a transient or a permanent voltage ?
