Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Arria II. Load Image with FPP Protocol. Nstatus stuck low ?!

Hello. I have an FPGA board with an Altera II connected to a Cypress bridge. I have written a firmware for the bridge in order to load the FPGA image with the FPP protocol (all 4 MSEL low)...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

thanks for your reply.

I have checked more in detail, and nSTATUS actually always goes low between the 62.000th and 62.999th byte.

I do not have access to a JTAG port for the FPGA, so this is unfortunately the only way I can troubleshoot it.

thanks for the document, I will have a second look at it