Forum Discussion

MehmetFide's avatar
MehmetFide
Icon for New Contributor rankNew Contributor
4 years ago

Arria 10 configuration through Linux fpga-arria10-passive-serial driver

Hello, We have a products which has iMX8M-Plus processor with an Arria 10 GX FPGA. We want to configure FPGA each time when our embedded system boots. To do that we have connected a SoM SPI p...
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,


Unfortunately, we do not have a direct documentation for this example.

The connection need to be like in the link you have shown previously:

https://www.intel.com/content/www/us/en/docs/programmable/683461/current/passive-serial-single-device-configuration-92795.html


Since you are using you own processor to do configuration, you may need to use JAM player. Running C coding from your processor to interact with FPGA.


Regarding the JAM player, please provide me your active email so we can send to you this software.