Forum Discussion

MehmetFide's avatar
MehmetFide
Icon for New Contributor rankNew Contributor
4 years ago

Arria 10 configuration through Linux fpga-arria10-passive-serial driver

Hello, We have a products which has iMX8M-Plus processor with an Arria 10 GX FPGA. We want to configure FPGA each time when our embedded system boots. To do that we have connected a SoM SPI p...
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,


Unfortunately, that was the old flow for reference. Because the FPGA cannot be configured from Linux. If you need to define or change the fabric behavior from Linux, you must use PR (partial reconfiguration).


But may I know the reason to configure the FPGA via Linux? For newer flow, you need to read the description here:

https://rocketboards.org/foswiki/Documentation/BuildingBootloaderCycloneVAndArria10#Appendix_45_Reducing_Arria_10_Fabric_Configuration_Time