Forum Discussion

MehmetFide's avatar
MehmetFide
Icon for New Contributor rankNew Contributor
4 years ago

Arria 10 configuration through Linux fpga-arria10-passive-serial driver

Hello, We have a products which has iMX8M-Plus processor with an Arria 10 GX FPGA. We want to configure FPGA each time when our embedded system boots. To do that we have connected a SoM SPI p...
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,


Do you have any further update?


MehmetFide's avatar
MehmetFide
Icon for New Contributor rankNew Contributor
4 years ago

Hi,

Thank you for the guideline, it was really helpful.

But in our case we don't have fpga0 in our /dev folder to use it with dd if=soc_system.rbf of=/dev/fpga0 bs=1M command as suggested in the link you provided.

Is there any particular field in the device tree file to have fpga0 in the dev folder?

Thank you.