Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Alterra embedded example::>Altera-SoCFPGA-HardwareLib-FPGA-CV-ARMCC::>FAIL ONRESET A9

Hi guys, I am getting a "fail in trying to reset A9 cortex processor" on the sockit cyclone V board. Basically I compiled the example project altera-socfpga-hardwarelib-fpga-cv-armcc but when...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Which development board are you using? Altera or Arrow?

I was getting same error with Arrow board last week and I managed to run parts of HardwareLib example on my HW project (I did a simple blinky). But since I have a lot of other thing to do I left it in drawer for a while.

Note that you have a line which says: No SYSID register found... Perhaps there is a Sys Id module missing in your Qsys or you didn't supply the right .svd file to the debugger.