Altera MAX V

Question

Hello,
I bought an Altera MAX V development Board, and download Quartus prime lite edition but I have got many issues.
I never worked with CPLD, FPGA, VHDL before and I bought this development Board in order to learn for future application and development. I would like to get software examples for that board, and I would like to get as many information as possible on that board.I tried to create a new project but quartus software tell me that I need to have device support installed and to download device support but i couldn't find the right link. I would like to have tutorials on using the quartus software
Can you help me
Xavier F.

richardt_altera · Answer

You may checkout the webpage below to download your required device .qdz file. Then open the Device Installer (after Quartus installed and search it in your PC) and direct it to the downloaded .qdz file directory to install the device in Quartus. 
https://fpgasoftware.intel.com/?edition=lite
For starter, you may checkout some of our Intel FPGA online training that is available in the link below.
https://www.intel.com/content/www/us/en/programmable/support/training/curricula.html#curricula-home
Example: The Intel® Quartus® Prime Software: Foundation (Standard Edition) (Online Training)  
https://www.intel.com/content/www/us/en/programmable/support/training/course/odsw1110.html
Best Regards,Richard Tanp/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.

richardt_altera · Answer

I have yet to receive any response from you to the previous question/reply/answer that I have provided.
With that, I will now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

Best Regards,
Richard Tan

p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.

Forum Discussion

Altera MAX V

2 Replies

Recent Discussions

MAX10 Dual Configuration

Cyclone I (EP1C3) Configuration Issues: Sequence and Environment Dependent Failures

EMIF Pin Assignment for Agilex 7 FPGA I-Series DevKit (DK-DEV-AGI027R1BES)

Quartus Prime Pro 25.1 fatal error during fitter: Windows "Efficiency mode" required

Step Load conditions