Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

4-8 Channel ADC for Altera DE2-115 using Simultaneous Sampling

We are building an Educational Embedded Computing System for a Road Profiler. I am incharge of taking care of the ADC interface to the DE2-115 board. Can anyone please suggest a suitable 16-bit stand...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Yash,

Linear Tech does have an eval board for the LTC1407, the link for the board is shown below:

http://www.linear.com/demo/dc1082a-a

This would allow you to interface this board to something like the DE-NANO board from Terasic or similar.

Also the circuitry is simply SPI; I would recommend using a pull up resistor on the CONV signal; otherwise SCLK and SDATA can be directly connected.

Best, James