Forum Discussion

KentLam's avatar
KentLam
Icon for New Contributor rankNew Contributor
6 months ago
Solved

300 Your license version is outside the range of the contract

Hello, I am receiving "Error 300" when generating a license file for "Questa-Intel FPGA Starter Edition" in the SSLC. I have attempted the following troubleshooting steps: 1. Created a "New Comput...
Configuration
  • KentLam's avatar
    KentLam
    6 months ago

    Update: For everyone that downloaded the license in the month of February, the Intel FPGA servers are currently bugged, so generating new licenses will not work until a contributor can prove me wrong. If you are doing an assignment that requires simulations with waveforms, the legacy version works just as fine. Please go to 

    https://www.altera.com/downloads/simulation-tools/modelsim-fpgas-standard-edition-software-version-20-1-1

    Select "Simulation Tools" > "ModelSim-FPGAs Standard" > "20.1.1 Latest" > Operating System(Windows/Linux)

    Please download the Windows version which is 1.2 GB.

    This requires no license but can still simulate like Quartus/Questa/waveforms.

     

milkuff's avatar
milkuff
Icon for New Contributor rankNew Contributor
6 months ago

A bettter question is, sorry, if I have a .v file, how do I simulate that in a Questa waveform (say I have a .v file and test bench cases). I may have this figured this out by the time anybody responds, but I am just putting this out in there just in case because I am trying to resolve this as fast as possible due to deadlines. Thank you for any help!

KentLam's avatar
KentLam
Icon for New Contributor rankNew Contributor
6 months ago

Quartus uses Questa to simulate the waveform, ModelSim does not require "Questa", you can simulate it by opening the file, compiling it, and opening up a new "Wave" file which is different than a so called "University Waveform". The interface with this older model looks different but it should run the same.