Forum Discussion

stev122's avatar
stev122
Icon for New Contributor rankNew Contributor
2 years ago

10M50DDF256C8G Programming Guide

Hi Altera Teams, We are a third-party programmer manufacturer. I am currently supporting the programming of the 10M50DDF256C8G IC. The cover of the programming file I refer to is as shown below. ...
Programmable Logic Device
FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi stev122,

To answer your question, yes, both Program_Done_Bit_Address and ICB_PROGRAM_SUCCESS_Bit_Address directly refer to the settings of the 10M50 in the programming file.

Additionally, I noticed you might have mistakenly referred to 0x031050DD. For the 10M50DDF256C8G, you should actually refer to it as 0x131050DD.

Regards,

Fakhrul

  • stev122's avatar
    stev122
    Icon for New Contributor rankNew Contributor
    2 years ago

    Hi Fakhrul.

    It looks like the file I currently have is too old.

    I see that my file is from the 2020 version.

    Could you please provide me with the latest version of the document to facilitate my follow-up support? Thanks.

    Regards,

    Steve