10GX Cyclone , 10CX220YF672E6G Support Micron MT25QU01GBBB8ESF-0SIT FLASH Device ?

Question

I have a design with the 10GX Cyclone 10CX220YF672E6G.
I am designing in with a micron Flash part # MT25QU01GBBB8ESF-0SIT. for configuration.

I need to verify that this micron flash will work with the 10GX cycle.
a snapshot of the schematic is attach ..
This is very urgent.
I appreciated very much.

thanks

ash_r_intel · Accepted Answer

Hi,Do you want the schematic to be reviewed? If yes, here is a reference for how it should be connected. https://www.intel.com/content/www/us/en/docs/programmable/683775/current/active-serial-single-device-configuration.htmlPlease make sure of the MSEL pin settings during configuration.Regards

Forum Discussion

10GX Cyclone , 10CX220YF672E6G Support Micron MT25QU01GBBB8ESF-0SIT FLASH Device ?

1 Reply

Recent Discussions

Cyclone-V SCFIFO - adding ECC to M10K/MLAB/Auto memory

Will serialization factor of 6 in LVDS serdes IP be supported in the future on Agilex5?

System PLL of Agliex5 PCIE example design cannot be locked after configuration

JTAG Chain Broken on Agilex 7-I Dev Kit

Request for Cyclone V Pinout File Information