Forum Discussion

Occasional Contributor

6 years ago

Where is EPCQ-L Flash located on Cyclone 10 GX Dev Kit board?

I am going to replace the pre-mounted EPCQ-L flash with a new flash from other vendor on my Cyclone 10 GX Dev Kit. The schematic shows EPCQ-L is U4. However, I am not able to find it on the board.

ShafiqY_Intel

Frequent Contributor

6 years ago

Hi 3000023197281.5681454609356633E12,

Can you send me you board picture (front and behind)?

Please make sure the serial number is clear when you take this picture.

Thanks.

yong

Occasional Contributor

6 years ago

Thanks WolfGang! Please see the pictures attached (Cyclone 10 GX Dev Kit board front, back and serial number). Thanks, Yong

Forum Discussion

Where is EPCQ-L Flash located on Cyclone 10 GX Dev Kit board?

Recent Discussions

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work