Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorviewing the de-2 board clock on the agilent 16821 logic analyzer during state-mode
Hi, How to view the DE-2 50 MHz clock on the waveform of 16821 Agilent Logic Analyzer during the state-mode? I use assign statement to output the DE-2 board clock to the GPIO[0] pin. Then ...
Altera_ForumHonored Contributor
Honored ContributorI have experience only from Tektronics logic analyzer. But there are few idea is in my head.
Does the state mode need external clock or is it set to need external clk. I think timing-mode uses it's own internal clk.
