Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

UART Pin Assignment

Hy there, another newbie question. I made applied UART function into my system (created in Quartus II). My question is it needed to apply any pin assignment to this UART in Quartus II? (since i ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

According to your figure.

You created your SOPC by your self.

So,why you attached uart which you don't even know how to use.

Anyway, you don't have to use uart.

DE0 board doesn't have RS-232C port.

Unless you want to use uart as a practice, you can connect tx port to rx port.

Have a good time with your board.