Forum Discussion

New Contributor

6 years ago

Trouble with External Memory Interface Toolkit during 'Initialize Connections'

Since a few days I've problem in 'Initialize Connections' with following Messages: ERROR: The connection to the hardware drivers could not be established. Before this Messages everything has ...

NurAida_A_Intel

Frequent Contributor

6 years ago

Also here is just some sharing regarding the cable that you can refer to: https://www.thailand.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf

Forum Discussion

Trouble with External Memory Interface Toolkit during 'Initialize Connections'

Recent Discussions

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work