Forum Discussion

TJoha6's avatar
TJoha6
Icon for New Contributor rankNew Contributor
6 years ago

Stratix 10 TX SI Development Kit: "PWR ERR" LED flashes intermittently and it is tricky to program it without errors in the transfer. Hardware problem?

We have the board at a university since about 7 months. The last week, it got tricky to program it (transfer the compiled .sof image from Quartus 19.2 to the board using USB) without errors in the tr...
  • TJoha6's avatar
    TJoha6
    Icon for New Contributor rankNew Contributor
    6 years ago

    Hi!

    It is the DK-SI-1STX-E-A board, the label on the box says to. It looks like the board from the link, with two "MXP" on the upper right side, contrary to some documentation (the Quick Start Guide) which have three.

    We got approval for donation in March 2019 (Donation Request Ticket [BR12170]), but it was not shipped until July 2019, probably to send us the Production Board and not ES.

    I have also added a photo of the S/N and P/N of the board, on the backside of the PCB.

    /Ted