Forum Discussion

kiransr's avatar
kiransr
Icon for Occasional Contributor rankOccasional Contributor
1 year ago
Solved

Stratix 10 SOC Development Kit

Hi, I am using the Stratix 10 SOC Development Kit and when programmer is opened in the Quartus and through auto detect I am not seeing the FPGA 1SX280HU2F50E1VGAS (as mentioned in the datasheet) wh...
Fpga Devkit
  • kiransr's avatar
    kiransr
    1 year ago

    Hi Fakhrul,

    Thanks for the reply.

    This issue is solved, and the solution is,

    In the Stratix 10 SX soc development kit, if the 10th dip switch of SW1 is only turned on then was able to program the Stratix 10 SX FPGA, with the desired .sof

    Regards,

    Kiran

FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

Hi kiransr,


Thanks for the clarification. I am glad that the problem is already solved.

At this point, I’ll transition this thread to community support. If you have any new questions, feel free to open a new thread to receive assistance from Intel experts. Otherwise, the community members will continue to help you here.


Thank you for your engagement!


Best regards,

Fakhrul