Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

SRAM read/write

Hello, Could anybody post a sample small program to READ/WRITE into the SRAM. I have been running issues with the SRAM read/writes. I am working on the MAX II CPLD development board which h...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hello,

I have found the solution to the problem. If anyone faces the same issue. I would suggest try checking the project settings. (right-click on the project -> settings-> device and pin options) and change the default setting for "Device and Pin options -> unused pins" from output driving ground to input tri-stated or input with bus-hold circuitry and everything will work just fine.

:) Thanks to hank from altera support for pointing this out

-neo