Forum Discussion

WabG's avatar
WabG
Icon for New Contributor rankNew Contributor
2 years ago

ScanManager : read IDCode

Dear support, On a SoC (Cyclone V) we want to access the JTAG chain from HPS through the ScanManager. The procedure below is extracted from the documentation and is executed on U-Boot but no data i...
Fpga Devkit
  • WabG's avatar
    WabG
    Icon for New Contributor rankNew Contributor
    2 years ago

    Hello,

    Yes this the only document I have found about the Scan Manager. In detail, i'm refering to chapter "Communicating with the JTAG TAP Controller" for the procedure but I have read the whole document.

    Regards,

    WabG

  • WabG's avatar
    WabG
    Icon for New Contributor rankNew Contributor
    2 years ago

    Aiman, Farabi,

    Can you provide me with an example to use the module ScanManager ?

    You should have this information as it is mandatory for the development and verification teams to test each feature implemented in the silicium of the devices.

    Otherwise, is there any other support team I can contact ?

    Regards,

    WabG

    PS : this isn't the first question I see in this forum without any answer. Having a good support is a big concern for the choice of Intel for the future development.