Running Triple Speed Ethernet Design on Cyclone III Development Board

hi slacker ,

i had a problem

im working on 1g link with rgmii mode ....i am using my own mac ,its working for 100Mbps ,but where as for RGMII i used separate code by using the ALTDDR_out,_in registers and im sending to pc ,,,,the linux what i m using its sending the packets ,,,the protocal is in such a way that it will send packets whenever its receive acknowledge ...my board is sending the ack nowledge ment packet that i taped in signaltap..but in wireshark i was not able to capture,,,,

and picture is not completed

reply as soon as possible